Minecraft is an amazing video game, but, occasionally, the water can obstruct your path and pose a challenge.
This can be particularly troublesome when attempting to maintain a dry residence in Minecraft.
In this article, we will be discussing some fundamental methods to eliminate water in Minecraft.
However, before delving into these methods, it is essential to have a basic understanding of how water operates in the game.
What is water in Minecraft?
Survival is the central theme of Minecraft.
While players can create their own worlds, they must also find ways to survive to keep playing.
One of the significant features of the game is the ocean, which covers nearly half of Minecraft’s map.
The water mechanics in Minecraft closely resemble those of real life, adding an element of realism to the game.
Players can interact with the water in various ways, such as fishing, swimming, and even building underwater structures.
However, if water is in the wrong location, it becomes useless and players may want to drain it for various reasons.
Fortunately, there are multiple methods available in Minecraft to accomplish this.
Players have different motivations for draining water; some may need more land to construct structures, while others may wish to establish an automatic farm around an ocean monument.
What is a water source block in Minecraft?
Have you ever observed a waterfall while playing Minecraft?
If you have not, try to pay attention to it next time you come across one, and you will notice that water flows out of a single hole in the wall.
It is worth noting that moving water always originates from at least one source block.
But what exactly is a source block, you might ask?
A source block refers to a stationary block of water that can be easily picked up and placed using a bucket.
These blocks appear as still water and don’t interact with flowing water.
They are placed horizontally on a surface, allowing water to flow over them.
All bodies of water in Minecraft are made up of these source blocks.
However, removing the source block won’t stop the water flow.
In fact, the water will flow right back in place once the block is removed, leaving you stuck in a loop.
While you can temporarily breathe underwater using a water breathing arrow shot from your bow, it is not a permanent solution.
In the next section, we will explore some permanent ways to deal with excess water in Minecraft.
How to get rid of water in Minecraft
Listed below are some of the alternate ways to get rid of water in Minecraft.
1. How to get rid of water in Minecraft using the source block
It is important to note that removing a source block will cause the water to stop flowing, but it will also create a new source block in the nearest available space.
This can lead to unintended consequences such as unintended water flows or even flooding.
To permanently remove water, you need to create a barrier that prevents the water from flowing.
This can be achieved by building walls or using blocks like sand or gravel to fill in the water source.
Additionally, you can use sponges to soak up the water, but they are limited in their capacity and need to be dried out before reuse.
Another option is to use redstone mechanisms to drain water automatically.
This involves creating a series of pistons and dispensers that can move blocks and items to manipulate the water source and drain it completely.
Overall, there are various ways to drain water in Minecraft, but it is important to be mindful of unintended consequences and choose the right method based on your specific needs and situation.
2. How to get rid of water in Minecraft using a sponge
Sponges are an effective way to remove water in Minecraft, but they are quite rare and can only be found in Ocean Monuments.
To obtain sponges, you will need to mine them from the sponge rooms.
However, keep in mind that the sponges will be wet.
To dry them, place them in a furnace along with a flammable item.
This process is similar to cooking food, except that you will receive a dry sponge instead of food.
Once you have a dry sponge, simply place it on the water and it will start to absorb the water around it, just like a real sponge.
You can move the sponge around to other areas with water, and it will continue to absorb.
A dry sponge can soak up water from 7 blocks at once. Once the sponge has absorbed as much water as it can, you can dry it again in a furnace and reuse it when needed.
It is important to note that Ocean Monuments can be dangerous, so make sure to be prepared before entering.
3. How to get rid of water in Minecraft using a bucket
A way to remove water in Minecraft is through the use of an empty bucket.
Crafting a bucket requires a crafting table and three iron ingots, arranged in a V-shape. After crafting the bucket, find the water source and hold the bucket in hand.
Right-click to fill it up with water.
You can then move the water to another location or wait for it to evaporate.
Buckets can also be used to transfer water to other areas as needed.
Be cautious, though, to ensure that the bucket is empty before picking it up to avoid spilling the water.
4. How to get rid of water in Minecraft by replacing the water source
In certain situations, it may become necessary to substitute a water source with an alternative block.
This process involves removing the existing water block and replacing it with a solid block of sand or dirt.
This technique proves particularly useful when dealing with a vast water body that needs to be eliminated, but you prefer not to use a sponge or bucket.
It’s important to note, however, that caution must be exercised during the replacement process to ensure that the new block is not placed too close to other water blocks, which could create an additional water source.
5. How to get rid of water in Minecraft using Lava
Another effective method to eliminate water in Minecraft is to transform it into stone or obsidian by utilizing lava.
Lava is readily available in many areas of the game and can be conveniently obtained by travelling through a nether portal.
Once you have a block of lava, simply place it in contact with a water block and it will instantly transform it into stone.
If the lava comes in contact with the water source block, it will convert into obsidian.
This method can be a useful alternative to using sponges or buckets, but be cautious not to accidentally turn other water blocks nearby into new sources.
6. How to get rid of water in Minecraft manually
To remove water manually in Minecraft, there is a time-consuming yet effective method that can be followed.
First, create a border around the water that needs to be cleared.
Then, fill the border with blocks until there is no water left inside it.
Finally, break the blocks, and all the water inside the border will be removed.
This method is particularly useful when sponges are not available, such as when players have not been to an ocean monument.
7. How to get rid of water in Minecraft using enchantments
One effective way to remove water in Minecraft is by using enchantments. You can enchant your boots with frost walker, allowing you to walk over water and turn it into ice.
To do this, you need to first acquire the enchantment by either fishing or trading with a librarian villager. Once you have it, place the boots on an enchantment table and add the frost walker enchantment to them.
After enchanting your boots, put them on and walk over the water you want to remove. As you step on the water, it will instantly freeze and turn into ice, removing the water from the game temporarily.
Note that the ice will eventually melt back into the water, so this method is not a permanent solution for removing water.
8. How to get rid of water in Minecraft using sand
Minecraft, sand and gravel differ from most blocks in that they are subject to gravity and will begin to fall if the block underneath is removed.
This unique quality can be utilized to remove stagnant water in deeper areas of the game.
By holding sand and continuously clicking the right mouse button, players can effectively fill a deep hole or area with sand.
The sand can then be easily removed using a shovel to eliminate the water. This feature simplifies the process of water removal within the game, making it more user-friendly.
Minecraft remove water command
In Minecraft, players have the option of draining water using a Minecraft command.
This method is ideal for players who do not have access to Minecraft editing or prefer not to use it.
It is also useful for those who want to avoid time-consuming methods like using sand or gravel to drain water from oceans.
The command to use for draining oceans is the “/setblock ~ ~ ~ repeating_command_block{auto:1,Command:”execute at @p run fill ~-15 ~-15 ~-15 ~15 ~15 ~15 air replace water”}” command.
To enter the command, players need to open the chat window, which differs depending on the Minecraft version.
For Java Edition (PC/Mac), Windows 10, and Education Edition, players need to press the “T” key.
For Pocket Edition (PE), they should click on the chat button, while for PS4 and Xbox One, they need to press the D-Pad (right). Nintendo Switch players should tap on the right arrow button.
Once the chat window is open, players should type the command “/fill ~10 ~0 ~40 ~-40 ~-3 ~-40 air 0 replace water” to replace the water with air in the region of water with the starting coordinate of ~10 ~0 ~40 and the ending coordinate of ~-40 ~-3 ~-40.
After typing the command, they can press the Enter button to run it.
The availability of commands in Minecraft may vary across different versions.
To provide clarity on which versions support commands, we have compiled a comprehensive list below.
| Platform | Supported Version |
|---|---|
| Java Edition (PC/Mac) | Yes (1.8) |
| Pocket Edition (PE) | Yes (0.16.0) |
| Xbox 360 | No |
| Xbox One | Yes (1.2) |
| PS3 | No |
| PS4 | Yes (1.14.0) |
| Wii U | No |
| Nintendo Switch | Yes (1.5.0) |
| Windows 10 Edition | Yes (0.16.0) |
| Education Edition | Yes |
How to get rid of water in Minecraft creative mode
If you aim to remove water in Minecraft creative mode, there is a specific method you need to follow which is the gravity and gravel method. To achieve this, you should adhere to the following steps:
[su_list icon=”icon: star” icon_color=”#50ff17″]
Firstly, you need to access the area where you want to eliminate water.
Then, stand over the area.
Fill the water with gravel.
Each time you place a block (i.e gravel) on the surface, it will soak up the water until the column is fully saturated.
[/su_list]
Repeat the above steps until all the water in the oceans is entirely cleared.
Conclusion
In this article, we have provided a comprehensive guide on how to get rid of water in Minecraft.
It covers all the necessary details and information about the process.
By reading this write-up, you can gain a thorough understanding of the drainage process, including how it operates on various versions of Minecraft.